Mercedes COMAND APS ECE Update software w211/w219 v21.090 CD

23

The original Mercedes disk designed to update the software in the COMAND APS system for w211 / w219 cars (see photo). Contains many European languages ​​including Russian.

Year of release: 30th week of 2006
Version: 21.090
Platform: Mercedes w211 / w219 cars
System requirements: Mercedes w211 / w219 car
Interface language: English + Russian

IMPORTANT: CD-TEXT, the voice in navigation and the contacts of the phone book do not become Russian, and also it seems like you lose the opportunity to get into the service menu (if you had one) and watch TV / DVD on the move

IMPORTANT2: in the original Mercedes-WIS knowledge base it is written that after downloading this software, the AGW unit coding is required (performed using the Star Diagnose diagnostic computer) – but I did not need

in order to load this update into COMAND APS, do the following

  1. Make sure that the battery is not discharged
  2. Make sure you have a European COMAND APS
  3. Start the car
  4. remove the disc from COMAND APS (if it was there)
  5. enable COMAND APS
  6. Simultaneously press three keys 1-3-8 for about 2-4 seconds – the update menu will appear (in the language that you have selected)
    4.insert disc – wait for loading
  7. will show the current version and the one to which you are going to update
    6.select YES / YES
  8. Next, wait and in no case turn off the machine until the system is updated
    8.at the end of the update (about 20 minutes) it is necessary
  • drown the car
  • close it with a key
  • wait until the dashboard goes out
    Thanks to the knowledgeable people who informed us that it is suitable for the following cars

Type 211 s
WDB2110041A792629’s
WDB2110081A990444
Type 211 s
WDB2110081A990445’s
WDB2110201A949571
Type 211 s
WDB2110201A949574’s
WDB2110221A872026
Type 211 s
WDB2110221A872046’s
WDB2110222A861146
Type 211 s
WDB2110221A872046’s
WDB2110222A861146
Type 211 s
WDB2110222A861248’s
WDB2110542A951356
Type 211 s
WDB2110542A952447’s
WDB2110891X211934
Type 211 s
WDB2110891X211942’s
WDB2112201A970590
Type 211 s
WDB2112201A970638’s
WDB2112222A855784
Type 211 s
WDB2112201A970638’s
WDB2112222A855784
Type 211 s
WDB2112222A855952’s
WDB2116202B000002
Type 219 s
WDD2193221A025240’s
WDD2193221A065778
Type 219 s
WDD2193221A065779’s
WDD2193222A053724
Type 219 s
WDD2193222A053782’s
WDD2193561A049607

original instruction from WIS

Use DAS version 01/2008 or later DAS version. It is imperative to accurately follow the instructions in the DAS
working operations. It is imperative that this work manual is observed to avoid
damage to the COMAND system.

Connect the charger to the battery. Use the charger to
Battery ensure sufficient
car battery power supply (over
12.5V).
Turn on the ignition In the COMAND block, there should be
there are no carriers
information.
Activate the update process Press the combination at the same time
software keys “1”, “3” and “8”.
Insert Service DVD After confirming the new version
update. software process
the update starts automatically.
Switch off ignition After successful completion
updates.
Lock the vehicle locks Wait until the combination is disconnected
devices. Software update
providing Comand successfully
ends only after a bus transition
CAN to rest mode.
Switch on the display Press any button on the display.
Press the “Display” key (“Anzeige”)
Press key “Map” (“MAP“) The display settings appear
cards.
Select the setting “Arrival time /
route “(“ Ankunftzeit / Strecke “)
Connect DAS
Start programming process Menu: “AGW / Block coding
AGW control unit by pressing “F2” control “,” Programming blocks
management “.
Start software update Select hard disk.
providing by pressing “F3”
Disable DAS

Download Mercedes COMAND APS ECE Update software w211/w219 v21.090 CD

Leave A Reply

Your email address will not be published.